All articles
    Lending
    10 min read••Vetting Vault Team

    DSCR Calculator for Business Acquisition Loans

    Calculate the debt service coverage ratio for an acquisition loan, see the largest loan the cash flow supports, and learn what lenders adjust before they trust the number.

    Every acquisition loan comes down to one number. The debt service coverage ratio (DSCR) tells a lender how many dollars of cash flow the business produces for each dollar of loan payments it will owe after closing. Get it wrong at the letter of intent stage and the deal gets restructured, or dies, weeks later in underwriting.

    The calculator below works the way an acquisition lender does. It starts from historical EBITDA, takes out what a lender takes out, adds the seller note if it has payments, and tests the result against the SBA's current minimums. It also solves the question buyers actually ask: given this cash flow, how big can the loan be?

    DSCR = cash flow available for debt service ÷ annual principal and interest on all business debt
    A ratio of 1.25x means the business earns $1.25 for every $1.00 it owes the bank and the seller each year. The extra 25 cents is the lender's margin for a bad quarter, a lost customer or a rate increase.
    Interactive calculator
    Does this acquisition clear the SBA's coverage test?

    Start from the seller's historical EBITDA, make the adjustments a lender would, and structure the deal. Purchase price stands in for total project cost.

    Transaction type
    Cash flow
    Structure
    Cash flow available
    $740K
    Annual debt service
    $477K
    SBA $431K + seller $45K
    DSCR
    1.55x
    1.25x minimum
    0x1x2x2.5x+
    Clears the 1.25x floor

    SBA loan of $2.72M. At this cash flow, the most the SBA loan can be is $3.45M.

    • Equity counted: 10% of the 10% minimum; a seller note with payments doesn't count.
    • Purchase price is $3M or more, so the lender must order a quality of earnings report and use its earnings.
    Show the numbers
    LineAmount
    Historical EBITDA$900K
    Replacement manager salary−$100K
    Unfunded capex−$60K
    Cash flow available for debt service$740K
    SBA loan (10 yrs at 10.00%)$2.72M
    SBA annual debt service$431K
    Seller note (10 yrs at 6%)$340K
    Seller note annual debt service$45K
    DSCR1.55x
    Largest SBA loan at 1.25x$3.45M
    Simplified: real underwriting also counts closing costs and working capital in project cost, any debt the business keeps, and a 1:1 global cash flow test across the guarantors. Seller note assumed at 6% over 10 years unless it's on full standby.

    The SBA's DSCR requirements for business acquisitions

    The SBA rewrote its change-of-ownership rules in SOP 50 10 8.1, which took effect on October 1, 2026. The requirements now sit in Appendix 15 of the SOP, and the coverage floor depends on the type of transaction:

    Transaction typeMinimum DSC
    Initial acquisition (a new owner buys the business)1.25x
    Owner buyout1.25x
    ESOP and cooperative1.25x
    Business expansion (an existing business buys another)1.15x

    The headline ratio gets the attention, but the rules about how it's measured decide more deals. A buyer who clears 1.25x on next year's projections and 1.12x on last year's actuals doesn't clear it at all, because the SOP no longer lets projections carry an acquisition. Four details shape what the lender can count:

    It's measured on history
    The ratio must be met on the last fiscal year-end, or the average of the last two, on a historical or adjusted basis. Lenders review post-closing projections but can't rely on them. Owner-occupied special purpose properties, such as hotels, are the exception.
    EBITDA over combined debt service
    The SOP defines historical DSC as EBITDA divided by all debt service after the transaction, seller payments included. Every adjustment the lender makes to that EBITDA has to be justified in the credit memo.
    Global cash flow must cover 1:1
    The guarantors' personal obligations have to work too. If the buyer's planned salary doesn't cover their own mortgage and living costs, the deal fails a second test even when the business clears the first.
    A QoE at $3 million and up
    For initial acquisitions and business expansions at that price, the lender must order a quality of earnings report and use its earnings figure in the DSC, not the broker's or the buyer's.
    What changed on October 1, 2026
    Under the previous SOP (50 10 8), most 7(a) loans needed 1.15x on a historical and/or projected basis. Acquisitions now need 1.25x and can't lean on projections. A deal that was approved at 1.18x last summer won't pass as structured today. That usually means a lower price, more equity, or a seller note moved to full standby.

    How lenders build the cash flow number

    The figure in the confidential information memorandum is a selling document. It usually starts from adjusted EBITDA with every add-back the seller and broker could defend. The lender starts there and works backwards. The SOP lists the adjustments a lender may make, including unfunded capital expenditures, non-recurring income, distributions, distributions for S-corp taxes, seller discretionary expenses and ownership compensation, and each one needs written support.

    Illustrative example
    Same business, two coverage ratios

    The listing's adjusted EBITDA is where the lender starts, not where it ends.

    Adjusted EBITDA in the CIM
    $1.06M
    Add-backs the records don't support
    −$100K
    "One-time" repairs that recur
    −$60K
    EBITDA the lender accepts
    $900K
    Replacement manager salary
    −$100K
    Unfunded capex
    −$60K
    Cash flow for debt service
    $740K
    DSCR on the CIM number
    2.22x
    DSCR the lender underwrites
    1.55x
    Both on $477K of annual debt service: a $3.40M purchase with 10% down, a 10% seller note and an SBA loan at 10%.
    Show the numbers
    LineAmount
    Adjusted EBITDA in the CIM$1.06M
    Add-backs the records don't support−$100K
    "One-time" repairs that recur−$60K
    EBITDA the lender accepts$900K
    Replacement manager salary−$100K
    Unfunded capex−$60K
    Cash flow for debt service$740K
    Annual debt service$477K
    DSCR on the CIM number2.22x
    DSCR the lender underwrites1.55x
    Under SOP 50 10 8.1 the lender must justify every add-back in the credit memo, and on deals of $3M or more it has to use the quality of earnings report's figure. Expect the number to shrink between the CIM and the commitment letter.

    None of these adjustments is a judgment that the seller is being dishonest. A CIM is written to show what the business could earn for an owner who runs it the same way; a lender underwrites what it will earn for this buyer, with this debt, starting the day after closing. Three adjustments account for most of the gap:

    Add-backs without paper
    A personal vehicle, a family member on payroll, a lawsuit settlement: each needs an invoice, a payroll record or a ledger entry. If the seller can't produce it, the lender won't count it.
    Who runs it after closing
    If the seller worked 60 hours a week for a below-market salary, someone has to be paid market rate to do that job. That cost comes out of cash flow before debt service.
    Capex the business can't skip
    EBITDA adds depreciation back, but trucks and equipment still wear out. Lenders subtract the capital spending the loan doesn't fund.

    On real estate deals there's one adjustment in the buyer's favor. When owner-occupied commercial real estate is part of the transaction, the lender may add back the rent the business was paying, since that rent becomes mortgage debt service.

    Seller notes and DSCR

    A seller note does two jobs in an SBA acquisition, and which job it does depends on whether it has payments.

    On full standby, with no principal or interest paid for the life of the SBA loan, the note carries no current debt service and can count as equity. It can count for no more than half of the required injection, so on a 10% requirement a standby note covers at most 5% of project cost. Interest can accrue, and the note is amortized after the SBA loan is paid off. The lender documents it on SBA Form 155 (Standby Creditor's Agreement) or its own equivalent, with the note attached.

    With payments, the note is ordinary debt. Its payments go into the denominator, and total debt including the note can't exceed the business valuation. If the note is interest-only, the lender has to impute an amortization of no more than 10 years when testing coverage, so an interest-only structure doesn't flatter the ratio. Seller debt from a change of ownership can be refinanced once it has been in place and current for 36 months.

    Toggle the standby box in the calculator to see the difference. On the example deal, moving a 10% seller note to standby removes about $45K a year of payments and lifts coverage from about 1.55x to about 1.72x. The catch is the equity rule: if the buyer was counting on that note as part of the 10%, only half of the requirement can come from it.

    Rate and term: the sensitivity that catches buyers out

    For the business portion of an acquisition, the SOP allows a 10-year term. Only the real estate portion of a purchase can amortize longer, up to 25 years, and when both are financed together the maturity is blended by use of proceeds. That short term makes acquisition debt service heavy, and it makes the ratio sensitive to rate.

    Illustrative example
    Two points of rate can move a deal across the line

    DSCR for $740K of cash flow, a 10-year amortizing SBA loan and no seller payments.

    Rate$3M$3.50M$4M$4.50M
    8%1.69x1.45x1.27x1.13x
    9%1.62x1.39x1.22x1.08x
    10%1.56x1.33x1.17x1.04x
    11%1.49x1.28x1.12x0.99x
    12%1.43x1.23x1.07x0.96x
    Clears 1.25x (initial acquisition)1.15x to 1.25x (business expansion only)Under 1.15x
    Show the numbers
    Rate$3M loan$3.50M loan$4M loan$4.50M loan
    8%1.69x1.45x1.27x1.13x
    9%1.62x1.39x1.22x1.08x
    10%1.56x1.33x1.17x1.04x
    11%1.49x1.28x1.12x0.99x
    12%1.43x1.23x1.07x0.96x
    Variable-rate SBA loans are priced off a base rate, so a buyer who clears 1.25x by a hair at today's rate can fall under it after a few increases. Many lenders stress-test the coverage for exactly that reason.

    Most 7(a) acquisition loans float over a base rate, so the coverage you underwrite at closing isn't the coverage you'll have in year three. A deal that only clears the floor at today's rate is a deal with no margin.

    Using the DSCR calculator on a live deal

    The calculator is most useful before anyone signs a letter of intent, when the price and structure can still move without anyone losing face. Once an LOI is signed at a price the cash flow can't carry, every fix is a renegotiation, and the seller hears it as the buyer backing away. Running the numbers the lender's way first turns that conversation into a structuring discussion instead.

    Solve for the loan, not the ratio
    Enter the cash flow you're confident a lender will accept and read the largest loan it supports. The gap between that and the price is what equity and the seller have to cover.
    Use the lender's EBITDA, not the CIM's
    Strip out any add-back you couldn't document today. If the deal only works with them, it's better to find out now than when the QoE comes back.
    Watch the $3 million line
    At that purchase price the QoE becomes mandatory, and its earnings figure replaces yours in the coverage test. Budget for the report and the time it takes.
    Check the equity at the same time
    An initial acquisition needs 10% of project cost, and the lender can't waive it. A seller note with payments doesn't count toward it; a standby note counts for half at most.

    Then get the supporting documents in early: three years of the seller's financial statements and tax returns, interim statements, a debt schedule, and the records behind every add-back. The lender will verify the financials against IRS transcripts, so the faster those arrive, the faster you know whether the number holds.

    Frequently asked questions

    What DSCR does the SBA require for a business acquisition?

    Under SOP 50 10 8.1, effective October 1, 2026, an initial acquisition, owner buyout or ESOP transaction needs a debt service coverage ratio of at least 1.25x, and a business expansion needs 1.15x. The ratio is measured on the last fiscal year or the average of the last two, on a historical or lender-adjusted basis, and projections can't be used to meet it.

    What is a good DSCR for an acquisition loan?

    The regulatory floor is only the starting point. Lenders set their own credit policy, and a deal that clears 1.25x by a few hundredths has no room for a rate increase, a soft quarter or an add-back the lender rejects. Most buyers and brokers want a visible cushion above the minimum before they take a deal to a lender.

    Does a seller note count in the DSCR calculation?

    If the seller note has scheduled payments, those payments are part of debt service and lower the ratio. If the note is on full standby, with no principal or interest paid for the life of the SBA loan, it carries no current debt service and can count as part of the buyer's equity injection, up to half of the required amount.

    Is DSCR calculated on EBITDA or SDE?

    The SBA's historical DSC for changes of ownership is EBITDA divided by the combined debt service after the transaction. Lenders can make documented adjustments, such as a market salary for the person who will run the business or unfunded capital expenditures. Seller's discretionary earnings usually overstates what's available, because it adds back the owner's entire salary.

    SBA requirements in this article are from SOP 50 10 8.1 (Appendix 15, 7(a) Changes of Ownership), effective October 1, 2026. Lenders apply their own credit policy on top of the SBA's minimums. This calculator is for illustration and isn't a credit decision.

    Get the add-back support before the lender asks

    Send the seller one Vetting Vault request list for the financials, tax returns, debt schedule and the backup for each add-back. They upload against each item, and you see what's still open without an email thread.

    Get Started Free